Patton electronic 4020 Series User Manual Page 79
- Page / 98
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Manual Upgrade 79
SmartLink 4020 Getting Started Guide 7 • System
Enable Auto Upgrade
Enable or disable auto upgrade—If enabled, the SmartLink 4020 will automatically check the upgrade server
on a periodic basis for new system firmware and software upon reload or power cycle.
Auto Upgrade Protocol
Select the protocol for auto upgrade
Upgrade Server
Specify the auto upgrade server IP address
Auto Upgrade URL
Specify the auto upgrade server by URL. This field is dependent on the auto upgrade service package installa-
tion. The default value is iadmgr.
Saving your work
When you are finished configuring settings, click the Save AutoUpgrade button to save the changes.
Manual Upgrade
For both HTTP and TFTP methods, the device will reboot itself into the downloader mode if the main appli-
cation is executing, and proceed with the ROM file download and permanent write of the application to the
device’s flash memory. During download of new firmware images, the LEDs on the SmartLink 4020 will flash
sequentially. Typically, HTTP downloads take about 5–10 minutes. After the download is completed, the
download status page will be displayed.
Figure 53. Manual Upgrade window
- SmartLink 4020 1
- Summary Table of Contents 3
- Table of Contents 4
- List of Figures 13
- List of Tables 15
- About this guide 16
- Precautions 17
- General observations 18
- General conventions 18
- Chapter 1 19
- General information 19
- SmartLink 4020 overview 20
- Chapter 2 21
- SmartLink installation 21
- Installing the router 22
- Installing the router 23 23
- Chapter 3 Home 24
- System information 25
- System Status 26
- Chapter 4 Network—WAN 27
- Status 29 29
- Settings 30
- Internet Configuration 31
- Device Operating Mode 31
- Specify fixed WAN configuration 31
- WAN PPPoE Configuration 32
- Enable PPPoE 32
- Authentication 32
- Dynamic DNS 32
- Configuring Dynamic DNS 33
- MAC Spoofing Configuration 33
- WAN MAC Address (Spoofed) 33
- Settings 34 34
- QoS (Quality of Service) 35
- ToS/DiffServ 35
- IPSec Configuration 36
- IPSec Configuration 37 37
- Saving your work 38
- Chapter 5 Network—LAN 39
- Add button 41
- Dynamic Routing 42
- Static Routing 42
- Viewing the Routing Table 42
- Port Forwarding 43
- IP Filtering 43
- Filter IP Range 44
- Chapter 6 Telephony 45
- VoIP Status 48
- User Name 49
- Caller ID Setting 49
- Subscribed for Voicemail 49
- Messages waiting 49
- SIP Configuration 50
- SIP Server Settings 50
- Gateway Settings 50
- SIP Parameters 52
- Hook Flash MIME Type 52
- RTP Parameters 52
- Audio/CODEC Configuration 54
- Phone 1 & Phone 2 55
- Phone 1 & Phone 2 56 56
- Phone 1 & Phone 2 57 57
- Phone 1 & Phone 2 58 58
- Phone 1 & Phone 2 59 59
- Phone 1 & Phone 2 60 60
- Speed Dial 61
- Chapter 7 System 62
- Set Security Password 65
- Configuration 66
- Enable Debug 67
- Debug Server 67
- Debug Connect Port 67
- Service Access 68
- Localization 68
- Call Progress Tones 69
- Dial Tone 69
- Prompt Tone 69
- Confirm Tone 69
- Holding Tone 69
- Busy Tone 70
- Ring Back Tone 70
- Off Hook Warning 70
- Distinctive Ring Setting 1–8 70
- Supplementary Service Keys 71
- Localization 72 72
- Localization 73 73
- Localization 74 74
- Localization 75 75
- Localization 76 76
- SNMP Configuration 77
- Auto Upgrade 78
- Manual Upgrade 79
- Figure 54. Reload window 80
- Chapter 8 Documentation 81
- Introduction 82
- Chapter 9 Logout 83
- Introduction 85 85
- Chapter contents 86
- Contact information 87
- Out-of-warranty service 88
- Returns for credit 88
- Return for credit policy 88
- RMA numbers 88
- Shipping instructions 88
- Compliance 90
- Radio and TV Interference 90
- Appendix B Specifications 91
- Voice Connectivity 92
- Connectivity 92
- Fax and Modem Support 92
- Voice Services/Features 93
- IP Services 93
- Management 93
- Operating Environment 93
- Appendix C Dial plans 94
- Sample Dial Plans 95
- Dial plan for this is: 96
- Appendix D Calling Features 97
Related products and manuals for Networking Patton electronic 4020 Series
Networking Patton electronic 29XX User Manual
(326 pages)
(326 pages)
Verwandte Produkte und Handbücher für Nein Tecumseh AWG4517CXNXC
Nein Tecumseh RKA5512YXA Leistungsdatenblatt
(6 Seiten)
(1 Seiten)
Nein Tecumseh AWG5519EVA Leistungsdatenblatt
(4 Seiten)
Nein Tecumseh AVA5532EXN Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh AVA7524ZXC Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh VSC9519ZNA Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh AJA7480ZNACJ Wartungshandbuch
(1 Seiten)
(1 Seiten)
Nein Tecumseh RGA5453BXD Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh AWG4530EXN Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh AEA2415AAB Leistungsdatenblatt
(2 Seiten)
Nein Tecumseh AVA5535EXG Leistungsdatenblatt
(4 Seiten)
Nein Tecumseh RGA5467EXV Leistungsdatenblatt
(2 Seiten)
© 2020, manymanuals.com. All rights reserved. | 1.500 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals