Patton electronic 4020 Series User Manual Page 32
- Page / 98
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Settings 32
SmartLink 4020 Getting Started Guide 4 • Network—WAN
WAN PPPoE Configuration
Figure 7. WAN PPPoE Configuration section of the Settings window
Enable PPPoE
Select Yes to enable PPPoE or No to disable PPPoE.
Authentication
Enter the username and password provided by your ISP.
Settings
Idle Timeout. Idle timeout before PPP connection is closed due to inactivity
Echo Timeout. The duration between sending PPP echo requests to server.
Echo Count. The number of unanswered PPP echo requests before the PPP connection is closed.
Service Name. PPPoE Service name
AC Name. PPPoE access concentrator (AC) name
Dynamic DNS
The SL4020 supports Dynamic DNS for use in environments where the IP address of WAN IP interface is not
assigned statically (i.e. permanently) but instead is assigned dynamically using protocols like DHCP.
With a statically assigned IP addresses, DNS is used to establish a fixed relationship between an IP address a DNS
name (example: 209.22.110.3 = [email protected]). The DNS name allows the IP device, like a phone
attached to an SL4020, to be found by the DNS name ([email protected]) anywhere on the Internet.
Prior to Dynamic DNS, dynamically assigned IP address changes could not be automatically reflected in DNS.
As a result, VoIP devices like the SL4020 could not always be located on the Internet by DNS name. This is
especially true for cable modem and ADSL services that use DHCP to assign addresses to customers.
With Dynamic DNS, the SmartLink 4020 will inform the dynamic DNS server of its IP address when it
receives a new or dynamically assigned IP address from the network. This allows the SL4020 to always be
- SmartLink 4020 1
- Summary Table of Contents 3
- Table of Contents 4
- List of Figures 13
- List of Tables 15
- About this guide 16
- Precautions 17
- General observations 18
- General conventions 18
- Chapter 1 19
- General information 19
- SmartLink 4020 overview 20
- Chapter 2 21
- SmartLink installation 21
- Installing the router 22
- Installing the router 23 23
- Chapter 3 Home 24
- System information 25
- System Status 26
- Chapter 4 Network—WAN 27
- Status 29 29
- Settings 30
- Internet Configuration 31
- Device Operating Mode 31
- Specify fixed WAN configuration 31
- WAN PPPoE Configuration 32
- Enable PPPoE 32
- Authentication 32
- Dynamic DNS 32
- Configuring Dynamic DNS 33
- MAC Spoofing Configuration 33
- WAN MAC Address (Spoofed) 33
- Settings 34 34
- QoS (Quality of Service) 35
- ToS/DiffServ 35
- IPSec Configuration 36
- IPSec Configuration 37 37
- Saving your work 38
- Chapter 5 Network—LAN 39
- Add button 41
- Dynamic Routing 42
- Static Routing 42
- Viewing the Routing Table 42
- Port Forwarding 43
- IP Filtering 43
- Filter IP Range 44
- Chapter 6 Telephony 45
- VoIP Status 48
- User Name 49
- Caller ID Setting 49
- Subscribed for Voicemail 49
- Messages waiting 49
- SIP Configuration 50
- SIP Server Settings 50
- Gateway Settings 50
- SIP Parameters 52
- Hook Flash MIME Type 52
- RTP Parameters 52
- Audio/CODEC Configuration 54
- Phone 1 & Phone 2 55
- Phone 1 & Phone 2 56 56
- Phone 1 & Phone 2 57 57
- Phone 1 & Phone 2 58 58
- Phone 1 & Phone 2 59 59
- Phone 1 & Phone 2 60 60
- Speed Dial 61
- Chapter 7 System 62
- Set Security Password 65
- Configuration 66
- Enable Debug 67
- Debug Server 67
- Debug Connect Port 67
- Service Access 68
- Localization 68
- Call Progress Tones 69
- Dial Tone 69
- Prompt Tone 69
- Confirm Tone 69
- Holding Tone 69
- Busy Tone 70
- Ring Back Tone 70
- Off Hook Warning 70
- Distinctive Ring Setting 1–8 70
- Supplementary Service Keys 71
- Localization 72 72
- Localization 73 73
- Localization 74 74
- Localization 75 75
- Localization 76 76
- SNMP Configuration 77
- Auto Upgrade 78
- Manual Upgrade 79
- Figure 54. Reload window 80
- Chapter 8 Documentation 81
- Introduction 82
- Chapter 9 Logout 83
- Introduction 85 85
- Chapter contents 86
- Contact information 87
- Out-of-warranty service 88
- Returns for credit 88
- Return for credit policy 88
- RMA numbers 88
- Shipping instructions 88
- Compliance 90
- Radio and TV Interference 90
- Appendix B Specifications 91
- Voice Connectivity 92
- Connectivity 92
- Fax and Modem Support 92
- Voice Services/Features 93
- IP Services 93
- Management 93
- Operating Environment 93
- Appendix C Dial plans 94
- Sample Dial Plans 95
- Dial plan for this is: 96
- Appendix D Calling Features 97
Related products and manuals for Networking Patton electronic 4020 Series
Networking Patton electronic 29XX User Manual
(326 pages)
(326 pages)
© 2020, manymanuals.com. All rights reserved. | 1.734 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals