Patton electronic 4020 Series User Manual download pdf (Page 71)

Localization 71

SmartLink 4020 Getting Started Guide 7 • System

Timeval ::= time in milliseconds

Repeatval ::= # of cycles to repeat

Tonename ::= "RING_0" | "RING_1" | "RING_2" | "RING_3" | "RING_4"

Idle ::= "IDLE"

Active ::= "ON" | "OFF"

Inactive ::= Idle "(" Timeval ")"

Active ::= Active "(" Timeval ")"

Sequence ::= Active | Active "," Sequence

Repetition ::= "[" Sequence "]" Repeatval

Repeat ::= "R"

Cycle ::= Sequence | Repetition

Fullsequence ::= Cycle | Cycle "," Fullsequence

Cadence ::= Fullsequence | Fullsequence "," Repeat | Fullsequence

"," Inactive "," Repeat

Ring ::= Cadence

Note The Bellcore standard ring cadence patterns are shown in table 2.

Supplementary Service Keys

Supplementary Service Keys are key sequences that can enable and disable certain calling features from an analog

phone handset attached to the SmartLink 4020.

Note The supplementary service keys must begin with a ‘*’,’#’ character, or f (ﬂash

hook) and follow a 1 or 2 numeric digit(s).

Table 2. Bellcore standard ring cadence patterns

Name Value

RING_0 ON(2000), IDLE(4000), R

RING_1 ON(800), OFF(400), ON(800), IDLE(4000), R

RING_2 ON(400),OFF(200)]2,ON(800),IDLE(4000),R

RING_3 ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R

RING_4 ON(500)

RING_5

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

No comments

Patton electronic 4020 Series User Manual Page 71