Patton electronic 4020 Series User Manual download pdf (Page 74)

Localization 74

SmartLink 4020 Getting Started Guide 7 • System

*7123019751000 and on-hook the phone. When 2 is pressed on the telephone key pad, 3019751000 will

be called.

Call Forward All

Conﬁgures the number to unconditionally forward all calls to. To conﬁgure call forward all enter the calling

preﬁx key (*73 is the factory default), the number to dial and then on hook the phone. You will hear a second

dial tone after entering the calling preﬁx key. Before using, Call Forward All must be enabled using the activate

sequence deﬁned in the supplementary service table.

Example:

*733019751000 and on-hook the phone. All calls received will forward to 3019751000.

IP Dialing

Allows direct calling using an IP address. To use calling by IP address enter the calling preﬁx key (*72 is the fac-

tory default), the * key, the IP address using the * key to between octets of the IP address, the * key and the

port number. You will hear a second dial tone after entering the calling preﬁx key. Before using direct IP

address dialing must be enabled using the activate sequence deﬁned in the supplementary service table.

Example:

To place a call to IP address 192.168.1.20:5061 enter *73*192*168*1*20*5060.

Call Hold

Conﬁgures the key sequence to place a call on call on hold – The factory default is ﬂash hook 1.

Call Waiting (call alternative)

Conﬁgures the key sequence to switch between calls. The factory default is ﬂash hook *.

Call Conference

Conﬁgures the key sequence to conference two calls together. The factory default is ﬂash hook 7.

Call Conference Drop

Conﬁgures the key sequence to drop the last call that was added to the conference the conference. The factory

default is ﬂash hook 8.

Call Transfer

Conﬁgures the key sequence for call transfer. The factory default is ﬂash hook 4.

Voicemail access

Conﬁgures the key sequence for call for voicemail access. The factory default is ﬂash hook *86. If the voicemail

key sequence is entered on the phone a call will automatically be placed to the conﬁgured service provider

using the conﬁgured authentication information.

Call Forward Busy Destination

Conﬁgures the number to forward calls to when busy. To conﬁgure call forward busy enter the calling preﬁx

key (*74 is the factory default), the number to dial and then on hook the phone. You will hear a second dial

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 97 98

No comments

Patton electronic 4020 Series User Manual Page 74