Patton electronic 4020 Series User Manual download pdf (Page 73)

Localization 73

SmartLink 4020 Getting Started Guide 7 • System

Speed Dialing

Enables or disables the speed dialing feature.

Income Caller ID

Enables or disables the display of incoming caller ID feature.

Self Caller ID Block

Enables or disables the blocking of transmission of caller ID feature for outgoing calls.

Calling Preﬁx Keys

Calling Preﬁx Keys and other conﬁguration parameters deﬁne the behavior of the calling feature.

Note Following function key must be start by ‘*’,’#’ character, or f (ﬂash hook)

and follow a 1 or 2 numeric digit(s).

Figure 46. Calling Preﬁx Keys section of Localization Window

Call Return

Automatically places a call to the number of the last call received.

Warm Line

Conﬁgures the number to call automatically after a delay period once the telephone goes off hook. To conﬁg-

ure the warm line number enter the calling preﬁx key (*70 is the factory default), the number to dial and then

on hook the phone. You will hear a second dial tone after entering the calling preﬁx key. Before using warm-

line calling it must be enabled using the activate sequence deﬁned in the supplementary service table.

Example:

*7013019751000 and on-hook the phone. When the handset is lifted, 301951000 will be called if another

number is not entered within the delay period speciﬁed under System > Localization.

Speed Dial

Conﬁgures speed dialing keys. To conﬁgure speed dialing numbers enter the calling preﬁx key (*71 is the fac-

tory default), the speed dial key, the number to dial and then on hook the phone. You will hear a second dial

tone after entering the calling preﬁx key. Speed dial calling must be enabled using the activate sequence deﬁned

in the supplementary service table.

Example:

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 97 98

No comments

Patton electronic 4020 Series User Manual Page 73