Patton electronic 29XX User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 326
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
Manage DNIS Window 78
Access Server Administrators’ Reference Guide 7 • Dial In
DNIS Profiles—clicking on the DNIS Profiles link takes you to the page where you can view and change
the DNIS profiles. Refer to
“DNIS Profiles” on page 80
DNIS Ip Pools—clicking on the DNIS Ip Pools link takes you to the page where you can view and change
the IP address pools. Refer to
“DNIS IP Pools Window” on page 82
Manage DNIS main window
ID (dnisPoolID)
The identification number that uniquely identifies the DNIS configuration.
WAN Link (dnisPoolDesrcWan)
The WAN link the dial-in user must be connected to in order to use this DNIS configuration.
Note
0 indicates that the WAN Link is not considered when determining if the
dial-in user matches the conditions of the DNIS configuration.
Dialed Number (dnisPoolDesrcDialedNumber)
The number the dial-in user must call in order to use this DNIS configuration. If more than one number is
specified, they must be separated by semi-colons (;).
Note
This field has a limit of 80 characters.
DNIS profile (dnisPoolAssignedProfile)
The DNIS profile used if the dial-in user meets the conditions of this configuration.
Note
A DNIS profile of 0 indicates that no profile has been selected and the DNIS
configuration is not activated.
Status (dnisPoolStatus)
Indicates if the DNIS Configuration will be used.
active(1)—This configuration will be compared to the inbound call and used if the dial-in user meets its
conditions.
notUsed(2)—This configuration will not compared to the inbound call to determine if the dial-in user
matches its conditions.
Add a DNIS Group:
Use this portion of the window to add a DNIS configuration.
1. Enter a unique ID in the ID field.
2. If needed, enter the WAN link.
3. Enter the dialed number.
4. Enter the DNIS profile to activate the configuration.
Note
Entering an ID that is already configured will change the configuration.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 325 326

Comments to this Manuals

No comments