Patton electronic 29XX User Manual download pdf (Page 162)

Introduction 162

Access Server Administrators’ Reference Guide 13 • Filter IP

Introduction

The access server software provides an IP filtering system that enables you to set up security as well as to provi-

sion services for selected customers. While IP filters are typically thought of as a security measure, many pro-

viders wish to limit some services a customer may have access to. These could include such things as limited

access only to an e-mail server or proxy server. IP filters also include the ability to encapsulate all packets

received on the specified dialup link in an extra IP header using RFC 2003. This would allow packets on a dial-

up link to be tunneled to a specific host.

Each filter is a defined list of parameters based upon attributes in the IP, TCP, and UDP headers. There are two

major steps to filter creation: first defining the filter, then applying it to a user connection. The same filter can

be shared by several users.

The access server enables 20 separate filters to be defined, of which up to 10 can be used on a single user con-

nection. A single filter can be assigned to a user via the Static Users Authentication. Multiple filters can be

assigned by using the RADIUS Filter-Id attribute.

Filters can be configured with default settings that are used for all dial-in sessions. If any filters are applied

through either RADIUS or the Static User filter parameter, then all of the dial-in defaults will be disabled and

only the specified filters will be applied.

Click on

Filter

IP under the

Configuration Menu

to display the

Filter IP

main window (see figure 67). The fol-

lowing sections describe each of the parameters found in FilterIP.

Figure 67. Filter IP main window

Defining a filter

To define a new filter, select a number and a name, then click on the

Submit Query

button to submit the

request. The number and name must not already exist in the IP FILTER list, and the number must be an inte

ger between 1 and 20. To delete a filter, enter just the ID number without a name and click on the

Submit

Query

button.

Modify Filter

After entering a number and name, click on the name of the filter to display the filter parameters window (see

figure 68).

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 325 326

No comments

Patton electronic 29XX User Manual Page 162