Patton electronic Model 3088/I User Manual download pdf (Page 20)

Configure the IP address 20

3088/I Getting Started Guide 2 • Initial configuration

Figure 5. Connecting the RocketLink-G to the local IP network (Model 3088/I shown)

Log onto the web management interface

You will now access the web management graphical user interface (GUI) to conﬁgure the RocketLink-G using

a standard web browser (such as Netscape Browser, Mozilla Firefox, or Internet Explorer).

1. At your PC, open a web browser and enter the IP address you assigned to the RocketLink-G’s Ethernet

LAN port in step 2 of section “Modify the IP address” on page 19. (In this example, 10.10.4.10.)

(see ﬁgure 6)

Figure 6. RocketLink-G web management home page

2. Log in to the web management home page using the username superuser and the password superuser.

Connect the G.SHDSL port

3. Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.

4. Plug one end of the cable into the (yellow) RJ-11 socket (labelled Line) on the RocketLink-G NTU.

(See ﬁgure 7.)

5. Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.

6. Go to G.SHDSL > Conﬁguration to conﬁgure the DSL port parameters.

MDI-X

LineEthernet

Power

Console

Connect to Ethernet port

Ethernet port

MDI-X switch

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 60 61

No comments

Patton electronic Model 3088/I User Manual Page 20