Model 3088A Series Quick Start Guide 3
1.0 Select configuration method
Before powering up, you must select one of the following methods for configuring your OnSite:
•
Plug ‘n’ Play—The OnSite comes factory-configured for Plug ’n’ Play configuration when connected to a
service-provider network.
•
DIP Switch—For deploying the OnSite in back-to-back applications. To use DIP-switch configuration you
must first set the DIP switches to a position other than all OFF or all ON before powering-up the OnSite. To
configure your CPE using the DIP switches, refer to the section entitled “Hardware (DIP-switch) configuration”
in the OnSite Model 3088A Series Getting Started Guide.
•
Software Configuration—Allows you to modify configurable parameters by connecting a PC to the con-
sole port and issuing software commands. To use software configuration you must set all the DIP switches to
the ON position before powering-up the OnSite. To configure your CPE via the console port, refer to section
“Software (CLI) configuration” in the OnSite Model 3088A Series Getting Started Guide.
2.0 Power up the CPE
Your G.SHDSL.bis CPE comes with one of the following power supply options:
•
External AC adaptor with detachable power cord
•
External DC power supply with terminal block connector (model 48V-PSM3)
2.1 Models with external AC adaptor
1. Connect female plug of the AC power cord to the AC adaptor provided.
2. Connect the barrel-type connector of the AC adaptor to the Power connector on the OnSite.
3. Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).
2.2 Models with external DC power supply
The 36-60 VDC DC to DC adapter is supplied with the DC version of the Model 3088A. The black and red leads
plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack
on the 3088A. (See figure 1).
Figure 1. DC Power Supply
To Power
Supply Jack
To -48VDC
Source
-Vin
+Vin
SWITCHING POWER SUPPLY
MODEL : SYD1106-0505
INPUT : 36-60V 0.2A MAX
OUTPUT : +5V 1.0A
OUTPUT POWER : 5W MAX
S/N: G01234567890
MADE IN CHINA BY SUNNY
Black lead (-V)
Red lead (+V)
Barrel power connector
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals