Patton electronic 2073RC User Manual download pdf (Page 8)

Note

0 = ON, 1 = OFF

Note Boldface

type

indicates a factory-default setting.

3.1 CONFIGURING THE FRONT INTERFACE CARD

Switches SW3-2 and SW3-1: Clocking Mode

Use Switch SW3 to set the system clock for the Model 2073RC. When

using two Model 2073RC together in a point-to-point application as short

range modems, set one unit for either Internal or External transmit clock

and the other unit to Network clock. When connecting directly to the

G.703 network, set the unit to Network clock.

DIP SW3-8

Not Used

DIP SW3-7

Not Used

DIP SW3-6

ON = DTE TM Lines Disabled

OFF = DTE TM Lines Enabled

DIP SW3-5

ON = FP TM Switches Disabled

OFF = FP TM Switches Enabled

DIP SW3-4

ON = V54 RX Disabled

OFF = V54 RX Lines Enabled

DIP SW3-3

Not Used

DIP SW3-2

DIP SW3-1

SW3-2

OFF

SW3-1

OFF

= Internal (Generated by 2073RC)

= External (From DTE)

= Network (Normal)

= Network (Campus)

SW3-2 SW3-1 Clocking Description

OFF OFF

Internal (Generated by 2073RC)

OFF ON

External (From DTE)

ON OFF

Network (Normal)

ON ON

Network (Campus)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Patton electronic 2073RC User Manual Page 8

Comments to this Manuals