Patton-electronic Multiport Asynchronous Statistical Multiplexer 303 User Manual download pdf (Page 39)

Command Line Interface (CLI) 39

TrinityAE Administrator’s Reference Guide 6 • Sync Serial Configuration

Command Line Interface (CLI)

Example – show controller sync-serial command:

V.35 DTE Serial Device Status

CD: OFF

CTS: OFF

DSR: OFF

DTR: ON

RTS: OFF

Clock Invert: False

Enabled: False

Table 8. Stat Mux- CLI Commands

Step Explanation

conﬁgure controller sync-serial Enter the sync-serial interface conﬁguration mode.

clock Set the parameters.

clock invert Invert the clock signal.

clock rate <4K-7168K> Set the generated clock sample rate in the range from 4K to

7168K (DCE interface only).

[no] shutdown Enable or disable the sync-serial interface.

status Display the status and conﬁguration of the sync-serial interface.

show controller sync-serial Display the status and conﬁguration of the sync-serial interface.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

No comments

Patton-electronic Multiport Asynchronous Statistical Multiplexer 303 User Manual Page 39