Patton-electronic 2156 User Manual

USER MANUAL MODELS 2156 & 2157 CopperLink Ethernet Extenders SALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007 Part# 07M2156_2157Doc# 03

10 Figure 4. CopperLink Ethernet Extender 10/100Base-T RJ-45 Connector Pinout. Connecting the 10/100Base-T Ethernet Port to a Hub or PC The Models 2

11 Figure 7. MDI-X switch pressed in performs 10/100Base-T crossover function 3.3 CONNECTING POWER An external AC or DC power supply is available s

12 External 48 VDC power supply • Input – Rated voltage: 36–60 VDC – Rated current: 0.25 A DC at nominal 48 VDC – 3-pin locking connector, 3.5 mm pit

13 3.5 CONSOLE PORT The Console Port is only intended for use by Patton Electronics Technical Support technicians.

14 4.0 OPERATION Once the CopperLink Ethernet Extenders are properly installed, they should operate transparently. No user settings required. This s

15 APPENDIX A SPECIFICATIONS A.1 GENERAL CHARACTERISTICS • Compact low cost plug-and-play router• 10/100 Ethernet• Unlimited host support• Eight fro

16 A.4 EXTENSION DISTANCE AND RATE • 2.3 Mbps (Model 2156) or 4.6 Mbps speed (Model 2157)• Distances up to 30,000 ft (9,144 m) on 24 AWG (0.4 mm) wi

17 A.5 LED INDICATORS • Eight LED indicators•Power• WAN Link, Transmit, and Receive• Ethernet Link, 100M, Transmit, and Receive A.6 POWER AND POWER

18 APPENDIX B MODELS 2156 AND 2157 SERIES FACTORY REPLACEMENT PARTS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) Patton M

19APPENDIX CMODELS 2156 AND 2157 SERIES INTERFACE PIN ASSIGNMENTC.1 10/100BASE-T INTERFACERJ-45• Pin 1: TX+• Pin 2: TX-• Pin 3: RX+• Pin 6: RX-• Pins

2 CONTENTS1.0 Warranty Information ... 3 1.1 Radio and TV Interference...

20Notes_______________________________________________________________________________________________________________________________________________

3 1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2156 or 2157 components to be free from defects, and will—at our option—repair or

4 1.3 FCC PART 68 1. You are required to request service from the telephone company before you connect the Model 2156 or 2157 to a network. When

5 1.4 INDUSTRY CANADA NOTICE NOTICE: This equipment meets the applicable Industry Canada Termi-nal Equipment Technical Specifications. This is confir

6 2.0 GENERAL INFORMATION Thank you purchasing this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant

7 Figure 1. Typical application The 2157/L and 2157/R work together to create a transparent extension between two peered Ethernet LANs. Figure 1 sho

8 3.0 INSTALLATION Because the CopperLink Ethernet Extenders require no configuration, they can be installed quickly. Installation consists of the fo

9 Follow the steps below to connect the CopperLink interfaces. Note The Model 2156 or 2157 units work in pairs. One of the units must be a Model 2156