Patton electronic MODEL 2126 User Manual

USERMANUALMODEL 2126PeNetTMMiniature10Base2 toParallel PrintServerSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-100707M2126-ADoc# 081021UARevis

4.2.6 Reset to Factory DefaultsThe sixth option on the Available Configuration Options screenresets the Print Server to all Factory Defaults. If you

4.6 Troubleshooting within NovellThis section describes the options available for diagnosing possibleproblems that may occur with the PeNetTMPrint Se

Novell SpecificUCONNECT Can’t Communicate with Print Server1) Check the correct Network Number and NIC Address have been entered2) Ensure PeNetTMPrint

5.1.2 Using PING to Verify Network CommunicationsPING is the standard method used on TCP/IP networks to verify thatcommunication is possible to and f

For example, to set the Power Up Status Page option to NO, thefollowing would be required:SET PU = NO5.3 Printing within TCP/IPThere are two main met

5.5 Troubleshooting within TCP/IPThe following hints should help you if trouble arises when using thePrint Server. If you experience additional prob

APPENDIX ASPECIFICATIONSOperating Systems Supported: Novell 2.15, 2.2, 3.11, 3.12 and 4.00 Utilities Supported: LPR, FTP, TELNET and PINGNetwork Conn

Table of Contents1.0 WARRANTY INFORMATION ...2Radio and TV Interference...2

2.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product.This product has been thoroughly inspected and tested and iswar

Follow the steps below to connect the Print Server to the printer andnetwork (the order is not critical):1. Connect the required network cable (10Base

3.4 Using PCONSOLEPCONSOLE is a Novell supplied utility for setting up Print Queuesand Print Servers. Before it is possible to print using the Pri

The following briefly explains the functions of the options listed on theprevious page:• File Servers to be Serviced This option allows the user to sp

3) In the Specify Print Server Address Screen, select “Search Networkfor Print Servers” and press [ENTER]. This will take you to the SelectedNetworks

7) When the search is complete, you will see a list of the Print ServersUCONNECT has located on the Available Print Servers screen (seebelow). Use th

4.2.2 Novell ConfigurationThe second option on the Available Configuration Options screenlets you enter information to configure the Print Server to