Patton electronic 2720/I Series User Manual download pdf (Page 16)

Rx PRM

The NetLink-T1™ transmits ANSI performance report messages

once a second when the framing mode is ESF. When the ESF Data

Link is set to ANSI T1.403, the unit recognizes PRMs with addresses

of 38h or 3Ah. The address 3Ah indicates the PRM is coming from a

Carrier, whereas the address 38h indicates the PRM is coming from a

Customer. When the ESF Data Link is set to AT&T TR54016, the unit

recognizes Carrier-originated PRMs, which have an address of 3Ah.

Current DIP Switch Settings

The Switch settings are displayed here to

facilitate troubleshooting your unit without

opening up the unit first.

3.3.6 Unit Information

The Unit Options screen looks like this (factory default):

Header Line 1 & Header Line 2

Headers 1 and 2 are provided for easy identification of your unit

after installation. You may want to give each unit a unique name via

the header lines to help distinguish one unit from another. You can

enter a header up to 40 letters long. Two lines provide 80 letters for

your use. That’s a lot of flexibility!

Password

The Password facility provides security by allowing only those who

know the correct password to configure the unit via the control port.

You can still configure the unit via the DIP switches. The password can

be up to 16 characters long, with no restriction on the combination of

characters you can use, so be sure to remember the password. If you

lose your password, you will lose the ability to access the unit via the

control port.

Rx PRM: 00010000000300023289

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Patton electronic 2720/I Series User Manual Page 16