Patton-electronic 1185 User Manual

USERMANUALMODEL 1184 &MODEL 1185Kilolight™ Single FiberModems SALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart#

APPENDIX ASPECIFICATIONSTransmission: Asynchronous and SynchronousClocking: Internal, external or derived from receive signalDistance: 3 miles maximum

APPENDIX CV.35 Interface Pin DescriptionM/34 Female ConnectorPin #SignalB SGND (Signal Ground)C RTS (Request to Send)D CTS (Clear to Send)E DSR (Data

APPENDIX C(cont)X.21 Interface Pin Description(DB-15 Female Connector)Pin #Signal1 . . . . . . . . . . . . Frame Ground2 . . . . . . . . . . . . T (Tr

TABLE OF CONTENTSSectionPage1.0 Warranty Information ...21.1 Radio and TV Interference1.2 C

1.3 SERVICEAll warranty and non-warranty repairs must be returned freightprepaid and insured to Patton Electronics. All returns must have a Return M

Switch S1-1 through S1-4 (Model 1184:): Async/Sync Data RateOn Model 1184 Switches S1-1, S1-2, S1-3 and S1-4 set twoparameters: synchronous or asynch

Switch S1-1 through S1-4 (Model 1185): Async/Sync Data RateOn Model 1185 Switches S1-1, S1-2, S1-3 and S1-4 set twoparameters: synchronous or asynchr

4.0 INSTALLATIONOnce the Model 1184 or 1185 is properly configured, it is ready toconnect to the fiber interface, to the serial port, and to the powe

Installing the New QuickConnect™ Module 1) Make sure the power switch is off. Leave the power cordplugged into a grounded outlet to keep the unit gr

5.0 OPERATIONOnce the 1184 or 1185 is properly configured and installed, itshould operate transparently. This sections describes power-up,reading th

5.3 DIAGNOSTICSModel 1184 and 1185 are equipped with V.54 diagnostics that maybe used to to evaluate the condition of the local and remote units, asw