Patton-electronic 1092 User Manual

USERMANUALMODEL 1092High Speed, 2-Wire,Sync & Async Short Range Modem SALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.c

3.2 CONFIGURING THE SOFTWARE SWITCHESThe Model 1092 features a menu-driven command system thatallows you to configure either the local or remote 109

3.2 CONFIGURING THE SOFTWARE SWITCHESThe Model 1092 features a menu-driven command system thatallows you to configure either the local or remote 109

3.2.1 Configuring the Local 1092To configure the LOCAL 1092, make a selection from the followingMAIN MENU screen. To configure the REMOTE 1092, type

3.2.1 Configuring the Local 1092To configure the LOCAL 1092, make a selection from the followingMAIN MENU screen. To configure the REMOTE 1092, type

1. DTE RateSelect Option 1 in the SOFTWARE CONFIGURATION menu toselect the async. or sync. DTE Rate of the Model 1092. Different DTERate menu screen

1. DTE RateSelect Option 1 in the SOFTWARE CONFIGURATION menu toselect the async. or sync. DTE Rate of the Model 1092. Different DTERate menu screen

MAIN MENU Option 5: Select Hardware/Software ControlSelect Option 5 from the MAIN MENU selects whether the Model1092 will use the hardware switch se

MAIN MENU Option 5: Select Hardware/Software ControlSelect Option 5 from the MAIN MENU selects whether the Model1092 will use the hardware switch se

MAIN MENU Option 7: Test ModesSelect Option 7 from the MAIN MENU to select the test mode statusof the Model 1092. (below). The Model 1092 Test Mode

MAIN MENU Option 7: Test ModesSelect Option 7 from the MAIN MENU to select the test mode statusof the Model 1092. (below). The Model 1092 Test Mode

TABLE OF CONTENTSSection Page1.0 Warranty Information ...21.1 Radio and TV Interference1.2.

3.2.2 Configuring the Remote 1092To configure the Remote 1092, make a selection from the followingREMOTE UNIT CONFIGURATION MAIN MENU. To return to

3.2.2 Configuring the Remote 1092To configure the Remote 1092, make a selection from the followingREMOTE UNIT CONFIGURATION MAIN MENU. To return to

4.2 CONNECTION TO THE SERIAL PORT The serial port interface on the Model 1092 uses interchangeableQuikConnect™Modules. Each QuikConnect™Module has

4.2 CONNECTION TO THE SERIAL PORT The serial port interface on the Model 1092 uses interchangeableQuikConnect™Modules. Each QuikConnect™Module has

Installing the New QuikConnect™Module1) Make sure the power switch is off. Leave the power cordplugged into a grounded outlet to keep the unit groun

Installing the New QuikConnect™Module1) Make sure the power switch is off. Leave the power cordplugged into a grounded outlet to keep the unit groun

4.3.2 Connecting to a DC Power SourceThe 48 VDC power supply option uses a 3-pin terminal block withspring-type connectors. Please refer to the Mod

4.3.2 Connecting to a DC Power SourceThe 48 VDC power supply option uses a 3-pin terminal block withspring-type connectors. Please refer to the Mod

NS Glow red to indicate that the local Model 1092 has not yet connected with the remote 5.3 TEST MODESThe Model 1092 offers two proprietary loopback

NS Glow red to indicate that the local Model 1092 has not yet connected with the remote 5.3 TEST MODESThe Model 1092 offers two proprietary loopback

TABLE OF CONTENTSSection Page1.0 Warranty Information ...21.1 Radio and TV Interference1.2.

2. If the above test indicates no errors are present, move theV.52 toggle switch DOWN, activating the “511/E” test witherrors present. If the test

2. If the above test indicates no errors are present, move theV.52 toggle switch DOWN, activating the “511/E” test witherrors present. If the test

APPENDIX BPATTON MODEL 1092 FACTORY REPLACEMENT PARTSAND ACCESSORIESPatton Model #DescriptionIM1/A...V.24 with DB25FIM1/B.

APPENDIX BPATTON MODEL 1092 FACTORY REPLACEMENT PARTSAND ACCESSORIESPatton Model #DescriptionIM1/A...V.24 with DB25FIM1/B.

APPENDIX CPATTON MODEL 1092 INTERFACE PIN ASSIGNMENT(Continued)V.35 Interface (M/34F Female Connector)(DCE Configuration)Pin #SignalB ...

APPENDIX CPATTON MODEL 1092 INTERFACE PIN ASSIGNMENT(Continued)V.35 Interface (M/34F Female Connector)(DCE Configuration)Pin #SignalB ...

APPENDIX DPATTON MODEL 1092 Pin Out Control PortThe 1092 control port is an 8 position connector, compliant withEIA/TIA-561.Pin FunctionRJ45 Pin No.Gr

USERMANUALMODEL 503SSerial Surge ProtectorSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart# 07M503S-DDoc# 074201UD,R

2.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product.This product has been thoroughly inspected and tested and iswar

2.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product.This product has been thoroughly inspected and tested and iswar

3.0 CONFIGURATIONThe Model 1092 is equipped with two sets of eight DIP switches,which allow configuration of the unit to a wide variety of applicati

3.0 CONFIGURATIONThe Model 1092 is equipped with two sets of eight DIP switches,which allow configuration of the unit to a wide variety of applicati

Switches S1-4 and S1-5: Asynchronous/Sync OperationUse Switches S1-4 and S1-5 to configure the Model 1092 forasync/sync operation. Both switches must

Switches S1-4 and S1-5: Asynchronous/Sync OperationUse Switches S1-4 and S1-5 to configure the Model 1092 forasync/sync operation. Both switches must