Patton-electronic 1025 User Manual

USERMANUALMODEL 1025and 1025SSynchronous ShortRange Modem withClocking OptionsSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patt

1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 1025 components to befree from defects, and will—at our option—repair or replace the p

3.0 CONFIGURATIONThe Model 1025 provides six configuration switches which allowselection of clocking method, RTS/CTS delay and data rate. This sec-t

3.2 SWITCH SETTINGSAll possible settings for the Model 1025’s configuration switchesare presented in the summary table and descriptions below. If yo

When connecting two Model 1025s, it is necessary to use a“crossover” cable. The diagram below shows how a crossover cableshould be constructed for an

1. Open the unit by gently inserting a screwdriver between theDB-25 connector and the lip of the plastic case (see below).You don’t have to worry abo

8. Place the 2 halves of the strain relief assembly on either sideof the telephone wire and press together very lightly. Slide theassembly so that

APPENDIX ASPECIFICATIONSTransmission Format: Synchronous, full duplexTransmission Line: Two unconditioned twisted pair 19 - 26 AWGClocking: Internal,

APPENDIX BRS-232 PIN CONFIGURATIONSCopyright © 1998Patton Electronics CompanyAll Rights Reserved1- (FG) Frame Ground2- (TD) Transmit Data To Model 102